一、電加熱開煉機特點及用途：
其主要的功能在于使產品能符合客戶所要求的質量及顏色，為了達到客戶的要求，再將實驗的結果及其比率用于生產線，而本機也就是將試驗用原料及配合劑以混合均勻之設備。
二、電加熱開煉機綜合技術規格：
| 型號Model | HY-230D | HY-230Y | HY-230S | HY-230DS |
| 適用范圍Scope of application | 塑膠、硅膠Plastic, silica gel | 普通橡膠Rubber | ||
| 煉膠量Compound amount | 1-10kg | |||
| 加熱方式Heating mode | 電加熱Electric heating | 油加熱Oil heating | 摩擦生熱Friction heat | 電加熱Electric heating |
| 冷卻方式Cooling method | 自然風冷Natural air cooling | 自來水冷Water cooling | ||
| 滾筒規格Roller specification | Ø230×L620mm | |||
| 溫度范圍Temperature range | Rt-300℃ | 自來水溫Water temperature | Rt-300℃ | |
| 滾筒開度Roller opening | 0.2-6mm | |||
| 調速方式Speed control mode | 定速、單調速、雙調速Constant speed, single speed, double speed | |||
| 速度范圍Speed range | 定速：約15r/min;調速約：5-25r/min或Speed: speed of about 10r/min; about 5-25r/min or specify | |||
| 速比Speed ratio | 定速和單調速：1∶1.17 The constant speed and single speed：1∶1.17 | |||
| 安全裝置Safety device | 膝登、前（左、右）、后（左、右）有手拍急停按鈕Knee board ,before (left, right), after (left, right) hands shoot emergency stop button | |||
| 單馬達功率Single motor power | 11KW | 15KW | ||
| 加熱功率Heating power | 6KW | 0KW | 6KW | |
| 總功率The total power | 18KW | 16KW | 23KW | |
| 電壓Voltage | 3Ø 380V | |||
| 體積Volume | 190×80×130cm | |||
| 重量Weight | About 1300kg | About 1600kg | ||
所有評論僅代表網友意見，與本站立場無關。