HSC-125D-S Closed Ink Cup Two Color Shuttle Pad Printing Machine

Machine Features:

Microprocessor control, low noise, clean ink scraping, stable performance, simple operation;

Comes with a solid built welded steel machine base and has adjustable floor levelers and a height adjustable work table;

Ink cup is turnable and adjustable in vertical and horizontal direction;

Suitable for single color small image printing, widely applied in many industries including stationery, toys, plastic, gift, electrical appliances, electronic, etc.

Machine Specifications:

Model No.: HSC-125D-S

Drive: Pneumatic

Ink System: Sealed Ink Cup

Ink Cup Size: ID82xOD90 mm

Plate Size: 200×100 mm

Max. Printing Speed: 1500 pcs/hr

Air Requirement: 5-6 bar

Machine Dimension: 680×460×1310 mm

Weight: 80 KG

Voltage: 110V/220V/230V 60/50Hz

Maintenance:

1. Carry out daily maintenance every day to keep the machine clean;

2. Remove water from the filter frequently to prevent water injecting into the internal air channel;

3. After printing, the rubber head, steel plate and inkwell shall be cleaned, and the drain thimble of the filter shall be drained upward.

4. Adjust the pressure regulating valve so that the pressure gauge indicates the compound “0" position.

5. Check each operation button, limit switch, signal lamp and the sensor once a month. If damaged, replace or repair immediately.