Bearings are commonly used in grease, such as calcium based smooth grease, sodium based smooth skid, calcium and sodium base smooth skid, lithium based smooth skid, aluminum based smooth skid, and molybdenum disulfide smooth skid. The amount of smooth grease filled in the bearing is suitable for filling in the inner space of the bearing.

高速應減少到1/3，潤滑脂過多會使溫度升高。江蘇NTN軸承在一些特殊的固體潤滑下應用的前提是少量固體潤滑劑參與潤滑脂，如參加3～5%的二硫化鉬可以減少磨損，提高抗壓力和熱的能力，關于高溫、優雅。

High speed should be reduced to 1/3. Too much grease will raise the temperature. Jiangsu NTN bearings in some special solid lubrication under the premise of the premise is a small number of solid lubricants to participate in grease, such as 3 to 5% of molybdenum disulfide can reduce wear and tear, improve the ability to resist pressure and heat, about high temperature, elegance.

CE、高真空、耐腐蝕、耐輻射、極低溫等，江蘇NTN軸承采用固體光在工程塑料或粉末冶金材料中，滑動劑可制成自光滑軸承零件。例如，平滑劑通過粘結劑與滾道、支架和滾動體結合，形成光滑的膜。具有一定的減摩耐磨效果。

CE, high vacuum, corrosion resistance, radiation resistance, extremely low temperature, and so on, Jiangsu NTN bearings use solid light in engineering plastics or powder metallurgy materials, sliding agents can be made of self smooth bearing parts. For example, a smoothing agent forms a smooth film by binding with a raceway, a bracket and a rolling element. It has a certain antifriction and wear-resistant effect.

（1），堅持軸承及其周?chē)那鍧崱?/span>

(1) adhere to the cleaning of the bearing and its surrounding.

即使是眼睛看不見的灰塵也會給江蘇NTN軸承帶來不良影響。所以，我們必須堅持清潔周?chē)够覊m不侵犯軸承。

Even invisible dust can cause adverse effects on Jiangsu NTN bearings. Therefore, we must insist on cleaning around, so that dust does not infringe on bearings.

（2）足夠的小心謹慎。

(2) enough prudence.

在應用中，承受軸承的劇烈沖擊會引起疤痕和壓痕，并成為干擾的原因。在張力下，裂紋和斷裂會發生，所以我們必須注意它們。

In application, bearing severe impact will cause scar and indentation, and become the cause of interference. Under tension, cracks and fractures will occur, so we must pay attention to them.

（3）使用適當?shù)氖址ā?/span>

(3) use the appropriate techniques.

為了防止現有事物的替代，有必要使用適當?shù)臇|西。

In order to prevent the replacement of existing things, it is necessary to use the right things.

（4）注意軸承的腐蝕。

(4) pay attention to the corrosion of the bearing.

當運行江蘇NTN軸承時，汗水會在手上生銹。注意使用干凈的手，戴手套。

When running Jiangsu NTN bearings, sweat will rust on the hands. Pay attention to the use of clean hands, it is best to wear gloves.

（5）壓緊軸承，該材料穩定可靠，不會損壞剛性板和軸承。壓力機由機械或液壓機手動推壓。

(5) press the bearing, the material is stable and reliable, and will not damage the rigid plate and bearing. The press is pushed manually by a machine or a hydraulic press.

注意，江蘇NTN軸承壓力機的輸出點應該在軸的中部，并且不應該偏壓。鐵姆肯軸承的應用。

Note that the output point of Jiangsu NTN bearing press should be in the middle of the shaft and should not be biased. The application of the Timken bearing.