AATCC TM16.3 Colorfastness to Light: Xenon-Arc

AATCC TM169 Weather Resistance of Textiles: Xenon Lamp Exposure

AATCC TM16E Colorfastness to Light

ASTM C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

ASTM C1442 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

ASTM C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

ASTM C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

ASTM C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

ASTM C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

ASTM C793 Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants

ASTM D1148 Standard Test Method for Rubber Deterioration Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

ASTM D1670 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials

ASTM D2565 Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications

ASTM D3424 Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

ASTM D3451 Standard Guide for Testing Coating Powders and Powder Coatings

ASTM D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

ASTM D4303 Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints

ASTM D4355 Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)

ASTM D4434 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

ASTM D4459 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

ASTM D4637 Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane

ASTM D4798 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

ASTM D4811 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

ASTM D5010 Standard Guide for Testing Printing Inks and Related Materials

ASTM D5019 Standard Specification for Reinforced CSM (Chloro-sulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane

ASTM D5071 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

ASTM D5383 Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists

ASTM D5398 Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

ASTM D5819 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

ASTM D6083 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing

ASTM D6551 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus

ASTM D6577 Standard Guide for Testing Industrial Protective Coatings

ASTM D6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

ASTM D6695 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

ASTM D6878 Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

ASTM D7356 Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device

ASTM D750 Standard Test Method for Rubber Deterioration Using Artificial Weathering Apparatus

ASTM D7869 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

ASTM D904 Standard Practice for Exposure of Adhesive Specimens to Artificial Light

ASTM F1164 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress

ASTM F1515 Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change

ASTM F2366 Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon-Arc Light Apparatus

ASTM G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

ASTM G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

FLTM BO 116-01 Resistance to interior weathering

GB/T 10485 Road vehicles- Lighting and light-signaling devices- Environmental endurance

GB/T 14522 Accelerated weathering test method for plastics, coatings and rubber materials used for machinery industrial products

GB/T 16259 Test method for accelerated weathering of building materials

GB/T 16422 Plastics -- Methods of exposure to laboratory light sources -Part 2: Xenon-arc lamps

GB/T 16991 Textiles --Test for color fastness--Color fastness and ageing to artificial light at high temperatures: Xenon-arc

GB/T 1865 Paints and varnishes--Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon- arc radiation

GB/T 18833 Retro-reflective sheeting for road traffic signs

GB/T 29061 Performance films for glass in buildings

GB/T 32088 Accelerated weathering test methods of automotive nonmetallic components and materials using a xenon-arc apparatus

GB/T 3511 Rubber, vulcanized- Test method for resistance to artificial weathering (xenon-arc)

GB/T 5137 Automotive safety glass test method

GB/T 6151 Textiles-Tests for color fastness-General principle of testing

GB/T 8427 Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test

GB/T 8430 Textiles - Tests for color fastness to artificial weathering - Xenon-arc fading lamp test

GM 9125P Procedures for Laboratory Accelerated Exposure of Automotive Materials

GME 60292 Designation of Colour Fastness and Resistance to Artificial Light

GMW 14162 Colorfastness to Artificial Weathering

GMW 14170 Coating Requirements for Elastomeric Seals

GMW 14650 Performance Requirements for Exterior Plastic Parts

GMW 3414 Test Method for Artificial Weathering of Automotive Interior Trim Materials

Hyundai MS 210-05 Molded Plastic Parts - Interior Use

Hyundai MS 300-32 Standard Test Method - Woven, Knit

IEC 61345 UV test for photovoltaic (PV) modules

ISO 105-B02 Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test

ISO 105-B04 Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test

ISO 105-B06 Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test

ISO 105-B07 Textiles - Tests for Colour Fastness - Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration

ISO 105-B10 Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation

ISO 11341 Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation (withdrawn)

ISO 12040 Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light

ISO 16474-1 Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance

ISO 16474-2 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps

ISO 18909 Photography - Processed photographic colour films and paper prints - Methods for measuring image stability

ISO 18930 Imaging materials - Pictorial colour reflection prints ? Methods for evaluating image stability under outdoor conditions

ISO 18937 Imaging materials - Photographic reflection prints - Methods for measuring indoor light stability

ISO 29664 Plastics - Artificial Weathering Including Acidic Deposition

ISO 3917 Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering

ISO 4892-1 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance

ISO 4892-2 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources

JASO M346 Light-exposure test method by xenon-arc lamp for automotive interior part

JASO M351 Automotive parts - Accelerated weathering testing method by xenon-arc lamp for exterior parts

JIS B 7754 Light-exposure and light-and-water-exposure apparatus (xenon arc lamp type)

JIS D 0205Test Method of Weatherability for Automotive Parts

MIL-STD 810F Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine)

MIL-STD 810G Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.5: Solar radiation (Sunshine)

Peugeot Citroen (PSA) D27 1389 Paint Coatings Rubbers and Plastics - Artificial Ageing by Weather-Ometer

Peugeot Citroen (PSA) D47 1431 Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures

Renault D27 1911 Rubber and Plastic Paint Coatings - Artificial Ageing by Weather Ometer

Renault D47 1431 Materials and Passenger Compartment Parts Behaviour of the Appearance to Artificial Light at High and Medium Temperatures

SAE J1885 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus (replaced by SAE J2412)

SAE J1960 Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus (replaced by SAE J 2527)

SAE J2412 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus

SAE J2413 Protocol to Verify Performance of New Xenon Arc Test Apparatus

SAE J2527 Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus

VDA 621-429 Tests for automotive coatings - Weathering test for colour fastness

VDA 621-430 Tests for automotive coatings - Test for resistance to cracking of 2 layer metallic clear coats

VDA 75202 Automotive interior materials - Colourfastness and ageing test against light at high temperatures: Xenon arc

VW PV 1303 Non-metallic materials - Lightfastness test for interior parts

VW PV 1306 Exposure Test for Determining the Tackiness of Polypropylene Parts

VW PV 3929 Non-Metallic Materials - Weather Ageing in Dry, Hot Climate

VW PV 3930 Non-Metallic Materials - Weathering in Moist, Hot Climate

 針對染色劑 / 添加劑 行業，可提供的有：

ASTM-DIN 艾司坦丁儀器環境模擬試驗設備，滿足如下國際國內行業標準：

       GB/T 16422.1 2019、GB/T 16422.2 2014、GB/T 16422.3 2014、GB/T 16422.4 2014、GB/T 、GB/T 16585 1996、GB/T 15255 2015、GB/T 15596 2009、GB/T 17875 1999、GB/T 、GB/T 13642 2015、GB/T 14274 2003、GB/T 14831 2003、GB/T 、GB/T 、GB/T 、GB/T 17603 2017、GB/T 11039.3-2005、GB/T 11206-2009、GB/T 14522-2008、GB/T 16259-2008、GB/T 18244-2000、GB/T 18424-2001、GB/T 18830-2009、GB/T 18950-2003、GB/T 19394-2003、GB/T 22771-2008、GB/T 31881-2015、GB/T 31973-2015、GB/T 32088-2015、GB/T 3512-2014、GB/T 35804-2018、GB/T 40512-2021、GB/T 5137.3-2002、GB/T 6808-1986、GB/T 12967.4-2014、GB/T 8013.3-2018、GB/T 8426-1998、GB/T 8427-2019、GB/T 8429-1998、GB/T 8430-1998、GB/T 18833-2012、GB/T 9276-1996、GB/T 23987-2009、GB/T 12754-2016、GB/T 13448-2019、GB/T 23983-2009、GB/T 24508-2020、GB/T 8814-2017、GB/T 12527-2008、GB/T 17657-2013、GB/T 24135-2009、GB/T 22411-2008、GJB 150.11A-2009、ISO 4892-1 2016、ISO 4892-2 2006、ISO 4892-3 2006、ISO 4892-3 2004、ISO 11341 2004、ASTM G53 88、ASTM D750、ISO 、ASTM D3611、ISO 1431/1 2004、ISO 1431/2、ISO 、ISO 、ISO 、ISO 877 1994、ASTM D5272 92、ISO 105-G03 1993、ASTM D518 1999、ISO 4892-82、ASTM  G53-84、ISO 、JIS K7212-1995、ISO 1431.1-1989、ISO 4892-1994、ISO 11758 1995、EN 13758、ISO 、IEC 61345 1998、ISO 12040 1997、ISO 188 2011、ISO 1431-3 2000、ISO 、ISO 2135-84、ISO 、ISO 105-B01 1994、ISO 105-B02 2014、ISO 105-B03 1994、ISO 105-B04 1994、ISO 、ISO 11507 2007、ISO 1419-1995、GB/T 16422.1 2006、GB/T 16422.2 2014、GB/T 16422.3 1997、GB/T 16422.4 1996、GB/T 1865-1997、GB/T 15255-1994、GB/T 15596 2009、GB/T 15596 2021、GB/T 14274 1993、GB/T 3511-2008、GB/T 12831 1991、GB/T 3681-2000、GB/T 14519-1993、GB/T 17603 1998、GB/T 11041-1989、GB/T 11206-1989、GB/T 14522-1993、GB/T 16259-1996、GB/T 18830-2002、GB/T 5137.3-2002、GB/T 12967.4-1991、GB/T 8013.3-2007、GB/T 8426-1987、GB/T 8427-2008、GB/T 8429-1987、GB/T 8430-1987、GB/T 18833-2002、GB/T 1767-1979、GB/T 9276-1988、GB/T 12754-2006、GB/T 13448-2006、GB/T 24508-2009、GB/T 8814-2004、GB/T 12527-1990、GB/T 17657-1999、GJB 150.11A-1986、GB/T 10119-2008、GB/T 10123-2001、GB/T 10125-2012、GB/T 10126-2002、GB/T 10127-2002、GB/T 10587-2006、GB/T 10834-2008、GB/T 11377-2005、GB/T 12000-2017、GB/T 12085.4-2010、GB/T 12967.3-2008、GB/T 13452.4-2008、GB/T 1771-2007、GB/T 14092.5-2009、GB/T 14093.4-2009、GB/T 14165-2008、GB/T 14834-2009 、GB/T 16266-2019、GB/T 16267-2008、GB/T 17897-2016、GB/T 18912-2002、GB/T 19291-2003、GB/T 19292.1-2018、GB/T 19292.4-2018、GB/T 19355.1-2016、GB/T 19745-2005、GB/T 20853-2007、GB/T 20854-2007、GB/T 24195-2009、GB/T 2423.17-2008、GB/T 2423.18-2021、GB/T 26323-2010、GB/T 28416-2012、GB/T 31588.1-2015、GB/T 35858-2018、GB/T 4797.6-2013、GB/T 5170.8-2017、GB/T 6461-2002 、GB/T 6465-2008、GB/T 7998-2005、GJB 150.11A-2009、ISO 6509、ISO 8044、ISO 9227、ASTM G48、ISO 4543、ISO 4611-2010、ISO 、ISO 4623-1 2000、ISO 、ISO 、ISO 、FED-STD-101、FED-STD-101C、IEC 61701 1995、ISO 11845 1995、ISO 、ISO 、ISO 14713-1 2009、ISO 10062 1991、ISO 16701 2003、ISO 14993 2001、ISO 16151 2005、IEC 60068-2 1981、IEC 60068-2-52 1996、ISO 4623-2 2003、ISO 21207 2004、IEC 60721-2-5 1991、ISO 10289 1999、ISO 4541 178、ASTM G110 1992、GB/T 10125-1997、GB/T 10125-2021、GB/T 10587-1989、GB/T 10834-1989、GB/T 12000-2003、GB/T 12085.4-1989、GB/T 12967.3-1991、GB/T 1771-1991、GB/T 16266-2008、GB/T 16267-1996、GB/T 2423.17-1993、GB/T 2423.18-2012、GB/T 4797.6-1995、GB/T 5170.8-2008、GJB 150.11A-1986、GB/T 10586-2006、GB/T 10589-2008、GB/T 10590-2006、GB/T 10591-2006、GB/T 10592-2008、GB/T 2422-2012、GB/T 2423.1-2008、GB/T 2423.2-2008、GB/T 2423.3-2016、GB/T 2424.6-2021、GB/T 5170.10-2017、GB/T2423.1-2008、GB/T2423.22-2012、GB/T2423.4-2008、GB/T 10263-2006、GB/T 11606-2007、GB/T 18102-2020、GB/T 23828-2009、GJB 150.4A-2009、GJB 150.9A-2009、GJB 150.3A-2009、GJB 150.8A-2009、GJB 150.12A-2009、GJB 150.14A-2009、GJB 150.22A-2009、GJB 150.24A-2009、GJB 150.25A-2009、IEC 60068-3-5、IEC 60068-3-5、IEC 60068-3-5、IEC 60068-3-5、IEC 60068-3-5、IEC 60068-5-2 1990、IEC 60068-2-1 2007、IEC 60068-2-2 2007、IEC 60068-2-78 2012、IEC 60068-2-1 2007、IEC 60068-2-14 2009、IEC 60068-2-30 2005、MIL-STD-810F 2000、MIL-STD-810F 2000、MIL-STD-810F 2000、GB/T 10586-1989、GB/T 10589-1989、GB/T 10590-1989、GB/T 11159-1989、GB/T 10591-1989、GB/T 10592-1989、GB/T 2422-1995、GB/T 2423.1-2001、GB/T 2423.2-2001、GB/T 2423.3-2006、GB/T 2424.6-2006、GB/T 5170.10-2008、GB/T2423.1-2001、GB/T2423.22-1987、GB/T2423.22-2002、GB/T2424.13-2002、GB/T2423.4-1993、GB/T 10263.1、GB/T 10263.10、GB/T 11606.1、GB/T 11606.17-1989、B/T 18102-2007、GJB 150.4A-1986、GJB 150.9A-1986、GJB 150.3A-1986、GJB 150.11A-1986、GJB 150.12A-1986、GJB 150.14A-1986、GJB 150.22A-1986、GJB 150.24A-1986、GJB 150.24A-1986、GJB 150.5A -2009、GJB 150.5A-1986、通用 ASTM G151、ASTM G154、 JISD 0205、SAE J2020、 涂料 ASTM D3794、ASTM D4587、FED-STD-1418、GM 9125P、JISK5600-7-8、ISO 11507、ISO 20340、M598-1990、NACE TM-01-84、NISSAN M0007、PrEN 927-6、 粘合劑 ·ASTMC1184、ASTM C1442、ASTM D904 、ASTM D5215、UNE 104-281-88、 塑料 ANSI C57.12.28 、ANSL.A14.5 、ASTM D4329·ASTMD4674、ASTM D5208 、ASTM D6662 、DIN 53384 、ISO4892-3、 JISK3750 、UNE 53.104、 屋面材料 ANSURMAPR-1-1990、 ASTM D4799 、ASTM D4811 、ASTM D3105、 ASTM D4434 、ASTM D5019、BS 903、Part A54 、CGSB-37.54-M 、DIN EN 534、 印刷油墨/美術材料 ·ASTM D3424 、ASTM F1945、 紡織品 AATCC TM 186、ACFFA Guideline

       ASTM-DIN 艾司坦丁儀器，代理銷售：

       【德國Binder賓德】環境模擬箱MK 56、MK 115、MK 240、MK 400、MK 720、MK 1000、MKF 56、MKF 115、MKF 240、MKF 400、MKF 720、MKF 1000、MKT 115、MKT 240、MKT 400、MKT 720、MKT 1000、MKFT 115、MKFT 240、MKFT 400、MKFT 720、MKFT 1000；真空安全干燥箱烘箱E 28、ED 23、ED 400、ED 56、ED 115、ED 260、ED 720、FD 56、FD 115、FD 260、FD 720、FED 56、FED 115、FED 260、FED 720、FD 23、FED 400、FP 53、FP 115、FP 240、FP 400、FP 720、M 53、M 115、M 240、M 400、M 720、ED-S 56、ED-S 115、FD-S 56、FD-S 115、VD 23、VD 56、VD 115、VDL 23、VDL 56、VDL 115、FDL 115

       【美國Q-Lab】氙燈老化試驗箱Q-SUN Xe-1、Q-SUN Xe-2、Q-SUN Xe-3；紫外老化試驗箱QUV/se、QUV/spray、QUV/cw、QUV/uvc、QUV/basic；Q-FOG SSP、Q-FOG CCT、Q-FOG CRH

      【其他進口品牌：亞太拉斯Atlas、愛斯佩克ESPEC、偉思富奇Weiss Technik、Voetsch、美墨爾特Memmert、SUGA】